Earthle Earthing Blanket (157x127cm) - Manual

How to Use the Earthle Earthing Blanket:

1. Remove the earthing blanket from the packaging:

2. Place the blanket on your sofa, bed, or any desired location:

3. Connect the end of the grounding cable to the grounding button on the earthing blanket:

4. Plug the grounding cable into a grounded electrical outlet. This works in all grounded outlets in Europe, including Belgium, Denmark, Germany, the Netherlands, Portugal, Spain, and Sweden. No grounded outlet at home? Order our Earthing Pin to ground yourself (without an outlet):

5. Ensure the gray side is on top and the white side, with woven silver threads, is on the inside. This part needs to make contact with your body to start the grounding process.

6. Optionally use a duvet cover, but ideally, make direct skin contact with the Earthle Earthing Blanket for the best effect:

7. 30 to 40 minutes of daily contact with the blanket is enough to experience the healing process of 'earthing'. A full night's sleep is more than sufficient. There’s no such thing as too much grounding.

How to Wash the Blanket?

The blanket is made from cotton (100% organic), polyester, and silver fibers (2%). You can wash the blanket as often as you like at 40° in the washing machine (occasionally at 60° if there are stains), with a detergent that doesn't contain chlorine bleach. Tumble drying is possible (on low heat), but preferably let it air dry to prolong the blanket's lifespan.

How to Check if an Outlet is Grounded?

A grounded outlet has two small iron pins, one at the top and one at the bottom of the outlet, in addition to the two holes for the plug. A non-grounded outlet only has the two holes for the plug. Below is an image of a grounded and non-grounded outlet.

Click here to order the earthing blanket. Questions? Check here our FAQ page or click here to get in touch.