Earthle Earthing (Desk) Mat (65x25cm) - Manual

How to Use the Earthle Earthing Desk Mat:

1. Remove the mat from the packaging:

2. Place the mat in a location of your choice (e.g., on your desk or on the floor in front of your office chair):

3. Connect the end of the grounding cable to the grounding button on the mat:

4. Plug the grounding cable into a grounded electrical outlet. This works in all grounded outlets in Europe, including Belgium, Denmark, Germany, the Netherlands, Portugal, Spain, and Sweden. No grounded outlet at home? Order our Earthing Pin to ground yourself (without an outlet):

5. Ideally, make direct skin contact with the mat (e.g., through hands or feet) for the best effect:

6. 30 to 40 minutes of contact with the mat daily is enough to experience the healing process of 'earthing'. There’s no such thing as too much grounding.

How to Clean the Mat?

The mat is made from vegan leather and rubber. To clean the mat, use a soft, natural soap diluted with plenty of water. Wipe the mat with a damp (non-abrasive) cloth or soft sponge.

How to Check if an Outlet is Grounded?

A grounded outlet has two small iron pins, one at the top and one at the bottom of the outlet, in addition to the two holes for the plug. A non-grounded outlet only has the two holes for the plug. Below is an image of a grounded and non-grounded outlet.

Click here to order the earthing desk mat. Questions? Check here our FAQ page or click here to get in touch.